![MFR300 MFR300](https://easygen.org/wp-content/uploads/2022/03/MFR300_1500x950-300x190-1.png)
측정 및 보호
단상 및 삼상 전력 시스템용 측정 변환기 및 보호 장치.
-
- CAN 버스를 통해 PLC 연결
- 릴레이를 사용하여 명령을 푸시하고 차단기를 제어합니다.
측정
이지프로텍 1410 | MFR300 | |
---|---|---|
기능 | ||
3개의 실제 RMS 전압 입력 | ||
3개의 실제 RMS 전류 입력 | ||
클래스 0.5 측정 정확도 | ||
구성 가능한 트립/제어 설정값 | ||
구성 가능한 지연 타이머 개별 알람(0.02 ~ 300.00초) | ||
4개의 구성 가능한 릴레이(전환) | 2 | 4 |
1 "작동 준비" 릴레이 | ||
전환 가능한 릴레이 로직 | ||
2kWh 카운터(최대 1012kWh) | ||
2kvarh 카운터(최대 1012kvarh) | ||
CANopen / Modbus 통신 | ||
CAN 버스/RS-485를 통해 구성 가능 / 서비스 포트(USB/RS-232) | ||
서비스 포트(USB/RS-232)를 통해 구성 가능 | ||
보호 | ||
과전압/저전압(59/27) | ||
과주파수/저주파수(81O/U) | ||
전압 비대칭 (47) | ||
과부하 (32) | ||
정/부하중(32R/F) | ||
불균형 부하 (46) | ||
위상 이동 (78) | ||
과전류(50/51) | ||
df/dt(ROCOF) | ||
지락 | ||
QV 모니터링 | ||
전압 증가 | ||
다음을 위해 자유롭게 구성 가능한 시간 종속 저전압 모니터링: FRT(fault ride-through) |
MFR-300 Multifunction Relay / Measuring Transducer with CANopen / Modbus Communication
The MFR 300 is a measuring transducer for monitoring single- and three-phase power systems. The MFR 300 has both voltage and current inputs for measuring an electrical power source. A digital processor makes it possible to accurately to measure true RMS values, regardless of harmonics, transients or disturbing pulses. The primary measured and calculated values are transmitted via CANopen / Modbus protocol to a supervisory control system.
The MFR 300 performs monitoring functions for mains decoupling, including four freely configurable time-dependent undervoltage monitoring functions for FRT (fault ride-through).
The primary measured values of voltage and current are used to calculate the real, reactive, and apparent power and the power factor (cosphi) values.
부속품
![구성 소프트웨어 Configuration Software](https://easygen.org/wp-content/uploads/2022/03/accessories4.webp)
툴킷
Woodward의 표준 소프트웨어 툴킷을 통한 구성.
![USB케이블 USB](https://easygen.org/wp-content/uploads/2022/03/usbCable.webp)
USB 구성 인터페이스
USB 포트 구성 인터페이스. PC/노트북 쪽은 갈바닉 절연을 통해 Woodward 장치 쪽에서 분리됩니다.
부품 번호: 5417-1251